5 Steps for repairing damaged laminate floors

5 Steps for repairing damaged laminate floors

 

Homeowners who have laminated floors installed in their own home often ask the question, “How to repair damaged laminate flooring?”. This type is known for its durability and sturdiness but when it comes to being exposed to water, this type are at their weakest. When submerged or exposed to too much water, laminate tends to deteriorate. Water can be introduced through spills or even mopping using a wet rag. However, homeowners shouldn’t worry too much when they begin to see signs of damage because they can repair it easily. How? Well, read on to find out 🙂

repairing damaged laminate floors

5 easy steps

Homeowners who plan on repairing their damaged laminate floors on their own can follow these five easy steps to bring back the beauty once more.

#  Know where the damaged section is – The first step is to determine which section has been damaged by water. You should also have the necessary tools needed for the repairs on hand. Include the following in your list of tools to use: nails chisel, hammer, drawing pencil and crow bar. The crowbar is needed to remove the damaged planks easily. In the instance where your crow bar doesn’t work in removing the damaged flooring, try creating a gouge for your crow bar to get a better grip. Use your chisel and hammer to create gouges for your crow bar.

#  Remove damaged materials and underlayment – Once you have removed the planks you will see the underlying materials. You should remove them as well because they are most likely soaked in water which can create moisture. If you have a vapor barrier installed underneath your floorboards make sure that you remove them as well. There are flooring parts being sold in hardware stores today so you can check them out when needed.

#  Replace damaged sections – The third step is to replace your damaged flooring with brand new ones. However, before you go and start laying out the new floorboards make sure that you have a layout to follow. The layout should be the same as that of the existing floor. Use your pencil to mark the area where you will be installing the replacement boards.

#  Re-size and cut floorboards – You should cut the replacement sections based on the marks you have made using your layout. Keep in mind that when you layout your floors you should do this one by one and that you need to secure them in place using your hammer and nails.

#  Double check your work – The last step on repairing damaged laminated flooring is to double check your work. Make sure that all the panels are installed properly and according to your existing layout. This helps to ensure that the surface is even.

Using Rugs for Wood Flooring

Now that you have an idea on how to fix it, you should learn how to keep your floors in good condition. If there are areas in your home where they experience high traffic, placing rugs is advised. Rugs can help prevent too much damage to the surface. The rugs are designed to absorb most of the impact when you walk or if there is any water spillage as well. You can purchase rugs from your home improvement store at various prices.

Laminate is definitely one type that is worth considering especially by homeowners who want to have a good floor system in their home. Not only is it durable and sturdy but it is also capable of withstanding heavy traffic. Its price tag is relatively cheaper compared to the rest of the options available today. And the best part is that you can be the one to install all of it which means you can save money in the process. Of course, by learning how to repair damaged laminate floors on your own, you are well on your way to making your new setup last you for a very long time.

 

Cause of Laminate Flooring Problems

Laminate flooring problems can occur at one time or the other. Even if the floors are considered to be the most durable of the lot, they are still prone to damages over time. One of the most common laminate flooring problems that you may contend with is warping.

What is warping and how can you avoid it? If you notice that your floors appear to have something coming out of it causing them to go uneven, chances are peaking is starting to occur. No doubt, you are a bit disturbed with this new form your floors have taken. Most homeowners think that when problems such as peaking starts to occur, the most likely culprit is the build-up of water underneath their laminate tiles or that the foundation of their floors has cracked. You might be surprised that these are not always the case.

What Really Happens

Most problems are caused by something other than water and cracked floor foundations. Finding the real cause of the problem can help you solve laminate flooring issues immediately and correctly. Some homeowners assume that since their friend’s floors warped, the root of the  problems that they have is the same. Assuming this can be expensive on your part not to mention time consuming. So, what can be the root of warping or peaking other than water? Well, here are some that you might want to keep in mind.

  • Lack of Expansion – Your floors is also experiencing expansion and contraction just like everything else. And because of this, you need to provide your floors with more space during their molding to accommodate expansion and contraction.  If the space between the planks are too tight, problems such as peaking may occur. You won’t notice the peaking immediately but as the pressure builds up this peaking can rise up to become a bump that will mar your pretty floors.
  • Fixed Moldings – problems can still occur even if you provide ample space for your floors during molding. This is due to moldings that are fixed. This can be a very complicated problem especially when the original contractor did a poor job on your floors. Keep in mind that the floors are made to float which means they don’t need to be secured to the moldings or even the sub-floor. If there is a solid area that they will be placed against, this can cause  problems for you to fix. First time installers or amateur contractors often attach the floating floors to the molding in order to secure them during installation or perhaps they just don’t know that this practice is wrong.
  • Board Length – The length of the laminate flooring boards can also be a source of  problems. Although this is the least likely scenario to occur, it can still happen in some cases. Boards that are too long can also cause the same problem as that having no room for expansion and contraction. If all of your boards meet the requirements of the contractor then you won’t have any problems. The only problem is when the contractor will be doing the installation. This can prevent you from knowing who the manufacturer of the boards is.

Making them look nice

So you want to have the best looking floors? Is there any way for you to get this? The truth is you can find the right type for your home when you take the time to read reviews on laminate flooring. Reading reviews can help you find the perfect flooring for your home. Just keep in mind that when you buy flooring you have an idea on their pros and cons and that you choose based on your preferences. It would help a lot of you choose flooring that can blend well with your furniture. By keeping in mind the common causes of laminate flooring problems, you will be able to avoid having to repair your floors time and time again. Remember, there are other factors that can cause  problems aside from water leaks and cracked foundation.  And once you find the source of  problems, you should try to repair them if you can by following the steps mentioned here on this blog.

Share This Post

Post Comment