DIY Shingle Roof Repairs

As a homeowner, it is your responsibility to learn how to take care of your shingle roof. This is important because there are times when leaks can develop on it which need to be addressed as soon as possible. Knowing the art of repairing it is a skill that every homeowner should know to be able to solve the problem before having to replace their entire system. There is no need to worry about DIY shingle roof repairs because as long as you have the necessary equipment, the confidence and the skill to do the repairs on your own, you are in luck. If small leaks occur on it, the repairing method for this is relatively easy, but if a large leak occurs it would be a good idea to contact Brinkmann Quality Roofing to get the leak fixed quickly. Or if you want to do it yourself, you just need to locate where the leak is coming from so you can apply the necessary repairs.

1a

How to Spot a Damaged Shingle Roof

For homeowners who have shingle system, you should know how to spot any signs of damage to determine whether your roofing needs repairs. Here are some ways for you to detect deterioration on it.

  • Survey the areas of roof – When it comes to repairing it, you should take the time to do an inspection on it. Look for shingles that are missing, misshapen, damaged or even curled. Double check the areas where the two flat surfaces meet to see whether there are any gaps or breaks that may cause water to seep in. After you find the source of the problem, it is time for you to apply repair. If it shows signs of curling, you can straighten them out with compound caulking or cement. This is applicable if the weather is hot. However, if the weather outside is cold, you will need to adjust your damaged it first. You can always reattach the shingles using cement.

  • Replace torn shingles – When you look at it and you see signs of damage or tearing, the best solution for this is to replace them. Lift the edge of the damaged shingle then remove the nails attached to it using a pry bar or nail puller. You should slide the shingle off gently before removing any remaining roofing cement. In the event that your shingles got torn away due to a bad weather, you still need to remove the nails that have been left behind. Slide the newly bought shingle on to the area that has been damaged. Make sure that it is properly aligned with the rest of the shingles. Secure the new shingle by driving in nails on the corners of the shingle. To make the shingle more secure, apply cement on the galvanized nails. Again, use cement to attach the replacement shingles with the old ones.

Shingle Roof – Roof Shingles for Sale

When working on your shingle roof, always make it a point to start your work on a clear day. Don’t forget to use safety harness so you won’t fall off accidentally. If you are on a budget but would like to repair it immediately, look for shingles for sale. There are some roofing stores that do have budget friendly shingles available which can go well with your roofing system. Any problems that you may have whether it is a torn shingle or leaking should be fixed as soon as possible to avoid any problems. It would be better if you have someone to help you with the repair project so you can get it done faster.

In case, you are not really confident in repairing it on your own, make it a point to hire a roofing expert to look at your roofing system. Get a cost estimate on the entire project so you can decide whether they have the best rates for you. Keep in mind that shingles prices often vary depending on the materials, design and style. You can always seek at least three roofing companies to compare their rates on fixing it. No matter whether it is you who will be repairing it or someone else, make it a point to get it done as soon as possible to avoid further problems in the long run.

Share This Post

Post Comment