Everything breaks down during regular use over time and a leaking shower pan is no exception. In repairing the defect, you may chose to undergo a general repair altogether, that is, replacing it with a new one and then putting in a replacement drain pan and its corresponding liner. You don’t have to worry about anything because there are a lot of for sale pans in the market today. But as it is usual with tiled ones, you will be surprised to learn that there are better ways to resolve your issue with it.
Doing Impromptu Repairs on a Leaking Shower Pan
You can generally resolve a leak by just buying and applying epoxy mortar throughout the floor. Epoxy mortar, when it hardens, will cover up any holes and spaces that cause the leak to occur in the first place. This will help you stop the problem from worsening, but it may not help you pinpoint the source of the problem. The epoxy may end up in the floor drain and you end up with more issues. You may also neglect to find inherent difficulties that may be found with your drain that is being produced by the leaks. In effect, you are merely delaying your need to undergo a full-time drain leak repair.
Leaking Shower Pan – Repairing a Faulty Pan
A better option for you to consider is to check on the grout that lies underneath your leaking one. You can simply apply silicone on any defects on it but it would be best if you do a general fix on it. If it is not epoxy-based, grout can only keep out water for so long; it fails over time and it tends to loosen and crack along its edges. According to reviews, the water that comes from it is the water that comes out of the defects; it is not diverted as it should be to the liner and drain.
You should be able to settle your issue with it by applying a thorough bond to it regularly. This will restore the waterproof qualities of it and make it last longer. You must also inspect underneath itself for incidences of moldy decay or corrosion. If you see some damage to it but see that the flooring beneath it remains unscathed, you can repair the damage to itself and not undertake a wholesale fix.
More often than not, itself should not be the cause of the problem, it is the loosened and crumbling grout that runs around the shower corners; the runoff that should have gone through it actually goes over it. So if you have determined that the grout itself is the cause of the pan, you should repair it right away.
The first step is to allow the shower to thoroughly dry out, and then apply silicon-based caulking to the loosened and cracked portions. If there is a need to replace altogether, you must use a grout saw to take out the damaged and decayed portions of the sealing. After this, spread in the fresh grout evenly using a grout trowel made of rubber. Make sure that you pay particular attention to the flooring itself and the corners and check if the grout is properly applied all over. After it has set, allow the sealant to dry and then tidy up the tiled floor. According to reviews, then all you have to do is to shower and see if it is resolved. If you just use silicone-based sealant on the grout, make sure that you have cleaned out the deteriorated parts of the grout with a grout saw and let it dry out in the air. Use enough silicone to cover the gaps; you might find putting the silicone down the small spaces or grooves within the difficult. When you have accomplished this task, you will know soon enough that you have succeeded in your task if you do not see any leaks on it.
It is but one of the many issues that you will find in the course of using your shower. However, if you know how to deal with the problem, you can find that fixing a leaking one is but a breeze.