Great tips on DIY Patching Plaster

Great tips on DIY Patching Plaster

 

If your drywall is looking pretty bad, patching plaster should be done as soon as possible. Can you actually stand the look of peeling plaster from your walls and ceiling? You might have a gorgeous and charming house but when the plaster starts peeling, you really need to do something about it.

Fortunately, you don’t really need to hire a wall contractor to do the repairs. In fact, you can fix any peeling on your walls even if you are not a skilled contractor. There are some damages that you can do on your own but if patching plaster walls is beyond your abilities, you can always call up a professional to help you out.

DIY Patching Plaster

Doing the Work On Your Own

Letting a contractor do the work on your walls and ceiling may be a good idea especially when you want the job to be done well. However, before you go and contact an expert, why not consider it on your own?

Even if you don’t have the skills to do the work but have enough confidence as well as step-by-step guide, you can pull off the repairs successfully. Although when referring to patch plaster, many homeowners think they will be using plaster, there are methods that don’t require you to use it at all.

If you are planning on repairing your plaster ceiling because it has cracks on it, using drywall materials for finishing can actually do the trick. This trick actually works as evidenced by hundreds of homeowners who stick with the usual finishing materials when patching plaster walls and ceilings. All that you need to keep in mind is to follow the right steps to it and you will be able to do so without any hitch.

Spackling tools are not the only items you need to have on hand when patching plaster cracks. You also need to buy drywall joints and tape. You should apply the tape around the damaged area to hold the crack together and to prevent it from further opening. Use a joint when treating each crack. Apply at least two coatings of joint compound to the damaged area before sanding. You can add texture afterwards if you want.

When you need to do this project on more than several cracks, you just need to follow the steps mentioned above before texturing. Adding texture to your walls and ceilings is actually a fun thing to do since you can let loose your creativity.

If are going to patch the hole use a hot mud to fill up the gap. This type of mud is actually harder and tougher than the common drywall joint compound. One drawback to this type of mud is that it dries quickly. This means that when you plan on using this type of mud, it is better that you choose one that has a longer setting time.

For dents and small holes you need to apply two coatings of compound before they even out. For fixing problems caused by bigger holes you need to fill in the space buying thin drywall compound. Apply the tape around the edges before topping the damaged area until it is even.

Finishing the Repairs

The steps mentioned above are not the only steps you can do. In fact, there are times when you will notice that the drywall doesn’t have any backing to it which you need to fix as well. Attaching backing material before applying the compound can help you finish patching plaster ceilings and walls successfully.

One thing you need to keep in mind when doing it on your own is that you need to clean the surface first. This way, when you start it, there won’t be any bumps appearing on your walls or ceilings. What you will have instead after it is a smooth and continuous wall and ceiling that your guests won’t even notice that they have been recently patched. It is a job that you can do on your own but if you believe that you can’t do the repairs on your own, always hire an expert wall contractor to help you out.

4 steps on Plaster Repair to Fix a Small Hole in Your Drywall

A lot of homeowners experience holes in their drywall at one point in their lives which is why they often seek additional information on how to do it on their own. It may be that they managed to make a dent or hole on their wall because they opened the door too hard or that someone threw a heavy object at the wall causing damage to it.

No matter what caused these holes, you should try to patch things up by applying it. You might be looking for tips on how to fix drywall so you can do it successfully. Fortunately for you, this article will give you the basic steps to use to fix any holes that you see on your walls caused by too much excitement or other causes.

4 Steps

If you are planning on repairing the plaster, you need to have the right materials and tools on hand first. Here are the items that you need to get before proceeding to repairing plaster walls. For the materials, you need to have your primer, paint, dry wall mud, water and mesh tape.

Plaster Repair tools

As for the tools, you need to have a sandpaper with 100 grit, knife, 3 inches paint brush, mask for respiration, and pail or bucket. You won’t have a hard time finding these items because you can buy them in your local hardware store. Once you have all these items on hand, you can now proceed to do wall repair to get rid of those holes that mar your walls.

  • To start, you need to clean the holes first. Make sure that there are no debris, strands or any other dirt that clings to these holes. This is important because you want the mud to stick to the solid sheet so it won’t crumble when it is fully dried.

  • Using your bucket, mix a small amount of mud for drywall. Pour water into the bucket then use your knife to mix the compound. The first mixture should have a thick consistency. Imagine your milkshake being really thick. The idea behind this is that the first application should adhere to the wall according to your needs instead of running down your walls. To scoop up the mud to continue with it, simply scrape off the dirt from the blade of your knife and use it to get mud from the mud mixture. You need to push the mixture into the hole to fill it up. You can do this by angling your knife while spreading the mixture. See to it that the first mud application during it is smooth. Allow the mud to dry for at least an hour. Expect to see cracks while you let it dry.

  • After drying the first coat of dry wall mud, you should use your mesh tape next. This material definitely sticks to ensure that it won’t be easily removed. You should cover the entire hole and the surrounding area with mesh tape when fixing the plaster. This step in patching holes in drywall can also be done buying plaster repair kits for sale that are being sold in stores. The only difference is that when you buy a roll of this mesh tape, you will have enough left over to fix any holes that might appear in the long run. The mesh tape is one of the most important items in your repair kit because it is the only item that can help keep your plaster mud in place.

  • Mix another batch of mud for the second application in your project. Instead of mixing a thick mud you should see to it that the composition of the mud mixture is a bit thin. Pour more water into the bucket of mud so you will be able to apply it on to your wall just like spreading peanut butter on bread. Make sure that you spread the mixture smoothly so you won’t have to worry about any excess mud to remove or sand afterwards.

Repairing Holes in Dry Wall

The steps mentioned above can be done by anyone as long as the holes in your walls are small enough for you to handle. When you repair hole in dry wall make sure that you mix the mud correctly for the first and second coating. Sanding your walls should help smooth out the mud application.

For those who are wondering how to repair hole in drywall, these steps are worth keeping in mind. Repairing dry wall holes shouldn’t be too difficult a task for anyone who wants to patch up their walls so they will look great. With plaster repair, you can cover up any damages, cracks or even holes on your own.

For homeowners, fixing a hole in drywall can be daunting especially when this is their first time to do the repairs on their own. Fortunately, there are DIY guides such as the one below that can be used for patching hole in drywall.

Share This Post

Post Comment