How to use Drywall Mudding

Buying Drywall mud is one component that is needed when it comes to fixing damaged walls. The quick set mud is typically used by those who are in need to reduce the time it takes to put back together their drywall. Compared to the traditional joint compound that is used after taping dry wall, the quick set mud is popular due to its ability to harden within a short period of time. Most contractors use or buy quick set drywall mudding when they are working to fix hole in wall on a large scale.

However, for DIY homeowners out there, this type may be a bit risky to use. Not only does it set rather quickly but also, when it comes to sanding the mudding on the drywall, you might find it harder to make it smooth. For those who want to start fixing their drywall on their own, it is best that you use mud with longer setting time compared to those that set quickly. Buying drywall mudding products can require up to 90 minutes or more for setting time.

Drywall Mudding

Pros and Cons of Quick Set Drywall Mud

There are different types of quick set drywall mudding for sale that is available in the market. You can choose based on their setting period which normally ranges from 5 to around 210 minutes. What makes this type of mudding for drywall really worth checking out? Well, for starters, this type of mud has glue in its composition.

This means that when applied after placing dry wall tape, it will be able to fill up any space immediately and stay in place. Another positive feature of is that it doesn’t shrink much compared to the common mud. Also, you really don’t have to worry about cracks appearing after application which makes it really worth using compared to the joint compounds that are commonly used. However, mud that sets quickly also has some flaws to it. Although many DIY users find the short setting period to be a welcome change, the problem is that it sets far too quickly for their tastes. What’s more, this type can be difficult to sand unlike other compounds. When the experts are asked on how to use it to its fullest, they usually suggest that they be applied along with the tape.

Afterwards, the joint compound should be applied to seal the wall. The reason behind this is that when it comes to sanding, the joint compound is easier to sand compared to fast setting mud. That is why, if you plan on getting rid of that unsightly hole on your wall due to an accident or wood rot, you should take the time to consider which type of compound should you use to get the best results for your walls. This way, you won’t have to waste time and effort when it comes to fixing it on your own nor do you have to hire someone else to redo the whole thing.

The Right Tips

The best way for drywall mudding mixture is to place a small amount of water into your pan first. Slowly pour the powder mixture into your pan then mix it using a ¾ inch taping knife. Once you have mixed the powder and water and have achieved a smooth consistency you can now apply it to your walls. If you haven’t yet achieved the consistency that you want, you can add a little more water or powder based on your needs.

You should be aware, however, that you need to put this process off until the time when you really need to apply it. Keep in mind that when you start mixing the powder of the mudding with water, the water will begin the process of setting which means you will have a small window to apply the mixture before it completely sets.

A 20 minute drywall mudding which needs 5 minutes of mixing time will only leave you at least 15 minutes for application. If you still plan on using your pan and mixing tools in the future, make sure that you clean them thoroughly after applying the mudding. You don’t want to end up with tools encrusted with hardened mud because it will render your tools useless in the long run. Well I hope these drywall mud tips were helpful. If you have any questions, please ask in the comments below or via the contact form.

Share This Post

Post Comment