Changing the Belt of a Riding Lawn Mower

A lawn mower is certainly a great machine for proper maintenance. A machine with mower blades and all other parts in good condition can mow the garden in no time with real ease. Proper care and replacement and buying of damaged parts is a must to ensure proper working of the device for a long time to come. Repairing will reward you with nice savings if repaired properly, but from bills and time you need to maintain your home.. Whether push ones or those running on fuel power, they all need proper maintenance and care to ensure correct working. The spare parts are available on the local shop. However, before you replace a part, it is always better to go through the troubleshooting section of the manual to ensure you are doing the things in a correct manner.

1a

Belt is one real important part which transfers the power from the engine to the mower blades. It is usually made up of rubber and with the passage of time it degrades due to the continuous friction and rubbing. This means that machine would not be able to give the same results as earlier and the situation calls for a simple repairs: the replacement of its belt. Here is how you can do it.

Lawn Mower Repair: Removal of the Deck

The first thing you would need to do in order to change it of a riding mower is to remove its deck. A desk is basically a casing that contains and protects the engine and other parts. Generally by pulling a pin or a switch that holds it in place, you can remove the deck. However, if you are not able to find it, consult the troubleshooting section in the owner’s manual.

The Belt

Next, you would need to locate it which should be really easy. It is wrapped around the pulleys which are circular in shape. There can be three or four such disks or pulleys in a riding one.

Lawn Mower Repair: Removal of the Belt

Before removing or changing a part, it is always better to click a picture of the same or draw a rough sketch which would act as a guide when you are putting a new one in place. Also, there are certain pieces available which can be used to alter the height of the parts. Use them to raise the height of belt so that you can access it easily without any inconvenience.

Try to find more locks around the system of the engine. Unlocking them would lead to the complete removal of the deck. Also, removal of these locks would also result in the development of slack and thus can be removed with ease. In case you are not able to get your hands on the locks, it is better to go back to the owner manual again.

Placing of the New Belt

You can buy a new belt from a local shop. You would need to mention that it is required for a riding engine. Using the image you clicked earlier, put it into place and put back the locks.

Placing the Deck

Once it is replaced, put back the deck in the desired area and lock the mechanism. After the riding mower repair, check the machine on a small portion of the garden. If it is not working well, the belt has not been placed in a correct manner and you would need to repeat the entire process again.

Proper care of parts of lawn mower is a must for proper repair and maintenance.