The fastest way for you to buy quality flooring in your home is to install floating engineered wood. This type of for sale flooring doesn’t need any specialist to handle the installation. In fact, you alone can do it provided that you have the right tools on hand. According to reviews, you might be thinking that you need to nail it down to secure it in place. This is not always so. When it comes to it, sometimes you just either click them together or glue them in place.
Another advantage in choosing one is that you can install it on top of existing floors regardless of whether it is concrete, ceramic, tile or stone. However, don’t forget to include underlayment for laminate during installation because this serves as padding in between floors to reduce the impact of your feet as you walk on your floors.
The How To’s of Floating Engineered Wood Flooring Installation
What you will need when installing it are the following: glue, foam, tool box, planks, wood blade and tool box. Once you have these things on hand, you can begin preparation to install your new laminate floors. Here are the steps you need to follow to install your floors correctly.
- Measure the Area – The best way to get an idea on how many planks you will need is to determine the direction your floors will be flowing. Installing laminate floors parallel to the wall is much better because it can create a more streamlined look for your space. You should then measure the space both its width and length so you can estimate the number of planks you will need.
- Door Castings Should be Trimmed – Make sure that you cut the castings of your doors before installing. This makes it easier for you to slide the laminate floors underneath the door.
- Install Underlayment for Laminate – Before you place your underlayment make sure that the subfloor is clean from any dirt or debris. This makes it easier for you to get the padding fit right in the space before laying your new planks.
- Install Laminate Planks – Lay the planks with the grooved edges facing the wall. Make sure that the length of the it is eight inches. Spacers should be installed at the sides before you continue laying your new floors.
- Measure the Final Course – If you are nearing the final stages of your installation include the spacers needed for the walls in your measurement. Don’t forget the area near your doors because you need to install laminate here as well.
- Use Pry Bar for the Final Course – To make sure that the planks near the walls and doors fit snugly with one another use your pry bar to tighten them. Afterwards, allow the glue or tape to set in and dry which can take about 12 hours at least.
- Finish the Trim – The trims should be put back in place once you have placed all the planks in the room. According to reviews, you need to install the trimmings on both sides of the door to create a seamless looking floor for you to enjoy.
How Important is Underlayment for Laminate to Your Floating Engineered Wood Flooring
Although buying floating engineered wood is designed to withstand all kinds of wear and tear, you should know that it needs some extra help in terms of providing your feet with a cushioning and sound reduction effect. These padding should be installed prior to installing the engineered wood to protect it against moisture and humidity.
When searching for floating flooring for sale, you can get padding from the same manufacturer to ensure quality. If you will be buying them separately measure the area where you will be installing your new laminate floors so you can get the right width, length and thickness when it comes to underlayments.
According to reviews, to successfully install your new one in your home, make sure that you follow the steps mentioned above. These steps aren’t all the difficult to do especially when you have someone to assist you. Keep in mind that you need to let the glue or tape dry for at least half the day before you remove them for your floating wood flooring for best results.