Shower Repair Made Easy

A shower that’s not working is not a sign of the end of times, but it is a sign that you should seriously consider a shower repair. The bathroom and its fixtures are some of the most used things in the house, so it’s natural for it to break down and need a replacement. Taking on a  repair might seem daunting at first, but with a little bit of know-how and effort, you can get your shower up and running again in no time. Most work can be accomplished without having to call in a professional plumber. Doing the repair yourself will save money since the only thing you need to buy are the parts.

1a

Easy to Do Shower Repair

One of the most common bathroom problems is a shower leak. A leaking shower head is a sign that the seals and gaskets need to be replaced. It’s a good idea to replace all the seals and gaskets at the same time because if one breaks down due to age, the rest will soon follow. Gaskets and seals are not expensive, but you do have to buy different sizes and types. Take your faucet apart before going to the nearest hardware store so you’ll know what you need for your shower repair. Aside from the gaskets and seals, you’ll also need some caulk, a crescent wrench and a screwdriver. Remember to clean everything before you replace faucet so it’ll look brand new.

A frameless shower or doors that get out of alignment are another kind of repair that you can easily do. Many door systems have two separate tracks. Sometimes one door might slip out of its own track and into the other door’s track so you can’t open them. When this happens, take a block of wood or hammer and tap the shower door gently back into place. Or you can try lifting the door and sliding it back into its own track.

Replacing a door sweep is also a problem homeowners will encounter. A door sweep keeps water from escaping the stall. However, the door sweep might crack, dry up or spring leaks after a few years. To replace the door sweep, brace the door open during the  repair and take out the old sweep. You can either pull it out or remove several screws. Bring it with you when you buy a new door sleep so you can get an exact replacement. Reinstall it by doing the reverse of what you did when you removed it.

Shower Repair Maintenance Tips for Your Bathroom

The bathroom is one room that you use daily, so it’s only natural that it will show some wear and tear. Knowing how to take care of it will lessen the need for a repair, sink replacement or floor tile makeover.

Dregs of dirt and soap that were not completely drained can harden on a bathtub surface or shower wall panels, and leave a residue. The amount of residue should be limited since this causes mildew or fungus. They also grow on damp areas so bathroom areas that are often wet and the shower drain strainer should be inspected and repaired regularly. Showers doors should be regularly checked for standing water along the door tracks. The presence of water means the drainage system is not working properly and should be fixed quickly to prevent mildew from forming and preventing the doors to work properly.

Aside from regular bathroom cleaning and repair, building materials like caulk, sealants and grout should be checked as well. To avoid water damage, tiles and grout should be sealed twice a year for extra protection from mildew. Homeowners should also check for loose or damaged tiles once a year and replace them when necessary. This will stop water from penetrating into the wall cavity.

Problems in the bathroom can usually be fixed with a simple repair or parts replacements, but be sure to leave the heavy fixing to the professionals. With a thorough cleaning and the right care, your bathtub or shower will look as good as it did when it was first installed, you can avoid unnecessary spending on repair and you’ll have a clean and healthy bathroom.

Share This Post

Post Comment