The waterheater is one of the most important equipment around the house. This appliance can actually last for 10 years or more and the best part is that you can actually forget that it even exists. However, once water leaks start to appear, you need to know how to fix it as soon as possible.
The only problem is that when it breaks down, you should be readying your wallet because plumbing repairs may come in a bit expensive. If you want to avoid having to dish out a lot of money just to get it working again, you can apply some basic maintenance to help prolong its life. These maintenance work doesn’t need an expert to do. Any homeowner who is willing to learn something new can actually practice these steps to help keep their waterheater in perfect condition for years to come.
Basic Waterheater Maintenance Tips
Who said that you need to hire professionals to maintain your unit? These basic tips on maintenance can actually be practiced by anyone who owns one in their home.
- Reducing Temperature – One of the best ways to extend the life is to lower the thermostat. The thermostat is the one that controls the temperature of your unit. This heater part is located at the gas valve of the unit or, if you have a heater that runs on electricity, you can find the thermostat at the back of the tank. What you need to do is to set the thermostat between 110 to 120 degrees Fahrenheit. This tip on maintaining helps reduce the risk of overheating as well as keeping the pressure to your heater at a minimum. And as a bonus, when you lower your thermostat, you are actually reducing the price of your monthly bill.
- Flushing Quickly – Homeowners that have hard water in their area often contend with dirt and sediment build up on their tanks. Although the best way to solve this is to do a full flush of the tanks, this may mean that you won’t be able to use your waterheater for the meantime. One of the steps you need to do is to drain water heater. However, you need to have the right tools on hand such as gloves and bucket. Look for the valve. Most water heaters have this valve located at the bottom of the tank. Turn the valve to drain water then seal it. If the water you have just obtained has plenty of sediment, repeat the process until the water becomes clear. Applying quick flush can actually prevent rust and other problems from occuring which is why it is recommended as one of the best maintenance tips to follow.
- Check the Pressure Relief Valve’s Temperature – One of the most important component of your waterheater is the pressure relief valve. This valve helps in removing any excess pressure coming from your unit. When this valve doesn’t work properly, it poses a threat in the form of ruptured tank or even explosion due to too much pressure building up. Most hot water heating systems have labeled this valve for easy identification. What you need to do is to slowly lift the lever about halfway up before letting it go. If you hear noises resembling gurgling and there was a small amount of water discharged, it means that the valve is working properly.
Get the Right Waterheater by Choosing the Best Water Heater Brand
Aside from following the tips on maintaining your waterheater, you should also buy the best heater for your home. If you are after the best water heater brand check out the reviews on popular heater brands out there for comparison. You should also know water heater replacement cost to get an idea on how much you will be spending. You should also consider the cost of installing heater by a professional if you want to make sure that it will be functioning properly once you have bought it.
These tips on prolonging the life of it had been tried and tested. So far, many homeowners have been using these tips to help save their waterheater with amazing results.