5 Steps on How to Repair Laminate Flooring that Has Buckled

Homeowners that do have laminate flooring installed in their home should take the time learn how to repair the flooring. These floors are among the most popular types for sale today. However, there are flooring problems that can occur which need to be addressed as soon as possible so you can maintain the beauty of your floors for a long time. According to reviews, aside from the floors being damaged easily by moisture and water, another problem that may come up is buckling.


Before you begin to repair the flooring, you need to know first what buckling is all about so you can apply the correct repairs. Well, for those who are not familiar with buckling, it usually occurs when there is too much tension on your flooring. When the floors are installed immediately without letting it get used to or acclimatize to the room temperature, for sure buckling will occur. One of the things that you will learn on how to fix the flooring when buckling occurs is to avoid it in the first place. You can do this by allowing the laminate tiles to get used to the temperature in the room where you will be installing them. Letting the  floor tiles contract and expand based on the room’s temperature can prevent buckling.

Steps on How to Fix it

There are several steps that you need to take when you want to repair it that has buckled. Following these five easy steps will allow you to fix your floors on your own so you won’t have to hire a laminate floor contractor to do the job for you.

  • Remove Base Trim – This is the first step you need to take when you repair it that is damaged by buckling. Removing the base trim from your floors will make it easier for you to begin your repairs.

  • Remove Spacers – You can do this by using a pry bar to remove the spacers easily.

  • Flatten the Floor – Once you have removed the spacers from the walls and the laminate tiles, you need to press down on the buckled tiles to flatten them. You can use a small mallet or you can use your own weight to press down the tiles that are buckling due to the tension on your floors. Just lightly tap your floors with the mallet to avoid damaging them.

  • Install Spacers – Part of the process is to place new spacers onto your floors once you have flattened them down. Make sure that you cut the spacers based on the new measurements that you have after flattening your floors. The spacers will help hold your floors in place. If you don’t have them then you can buy them in stores today since there are a lot of for sale spacers in the market today.

  • Install New Base Trim – After installing the spacers, the last step is to replace the old base trim before cleaning your work.

DIY Laminate Floor Restoration

Anyone can repair it as long as they know the proper steps to follow. There are many self-help DIY laminate floor restoration guides out there that you can take advantage of if you plan on installing the floors in your home. You should also have the confidence, otherwise it is best that you leave it to the professionals. According to reviews, any laminate flooring complaints that you may have that you want to get fixed as soon as possible should be directed to a professional. Although this may mean that you will be paying a little extra, the end result is usually worth the money.

It isn’t really hard especially when the problem is buckling. All that you have to do is to follow the steps mentioned above and you will be doing just fine. If this is your first time to have the flooring installed, you should look for the best laminate brand in the market so you can get the highest quality for your floors. Keep in mind that as a homeowner, you have the responsibility of maintaining the looks of your floor that is why it is best that you take the time to learn how to repair it on your own.

Share This Post

Post Comment