Deck Coating – The Art and Science Behind It

In any industrial or commercial establishment, it is always the deck coating of their garage, deck and patio that suffer the most damage. This is due to the fact that they are constantly exposed to the outside elements as well as machine and human traffic. These locations are usually accessible to anyone including various weather conditions that is why theirs don’t usually last that long. Most owners want to make sure that these high traffic areas are in good condition to avoid any accidents that is why it is a common practice for them to do regular maintenance.


The  coating for these exterior areas are usually prone to rapid deterioration. For managers, spending time and money in maintaining this, using building maintenance services is a must in order for these areas to be freely used without any worries. There are dozens of methods that may be used in order to restore coatings. These include surface resealing, repairing any damaged sections or a total overhaul where the entire section is replaced.

Types of Deck Coating

When searching for covered coatings, you will find that they come in different types that are based according to their uses. It is made from urethane is usually used to waterproof the deck but its drawback is that it deteriorates rapidly and its material is not durable when it comes to damages. If you will be using urethane, you need to apply layers of it on to the surface before broadcasting sand all over it. The sand is used to provide a better grip on the floor.

Another type is the one that can be used to restore to it is the slip sheet decking. This is best described as a combination of paper and materials that come in multiple layers. This is slipped over the surface to protect it against common damages like scratches, bumps and dents and to provide more flexibility to the floors in case of contracting and expanding.

Deck Coating – Concrete Resurfacing Products

One of the most common questions asked by many when it comes to coating is how often should it be repaired. Usually,it needs to be repaired every 2 or 3 years depending on the suggestion of the manufacturer. Another factor that you need to consider is the use of the deck in your facility. Is it constantly exposed to traffic and weather elements like sun, wind, rain, and snow? If so, the repair period should fall around 2 years at most. There are other important factors that you need to consider when deciding on how often you will be repairing it If you are in doubt, you can always ask the expertise of deck contractors to assess the damage for you.

If the damage to your deck coating needs you to resurface your deck, you can start looking for concrete resurfacing products in hardware stores today. These products can range from cheap to expensive depending on the brand that you will be using. Follow the instructions indicated to apply the resurfacing material correctly.

When it comes to this, as soon as you see signs of damages, you really need to fix it as soon as possible. No matter what caused this deterioration on it, repairing it immediately is highly recommended to avoid further accidents along the way. If you want to get a sure answer on whether it is time for you to start repairing it, consulting an expert is a must. This way, they will be able to assess your floors and recommend the best course to take for your deck coating.

There are some owners who are wondering whether they can waive the repairs.  This may depend greatly on the function of the deck and whether the company can afford not to repair. If the area in question is a critical area, it is best that you invest money and time in getting repaired. Leaving your damaged unattended can actually cause you more problems in the long run which can cost you more than your initial expense.

Share This Post

Post Comment