Guide to remove mold on drywall

Guide to remove mold on drywall

The walls of your home are the first thing noticeable thing when a visitor comes in especially when it is painted smoothly with a well choice of paint color. However, as time passes by you can observe some things are growing every other day

remove mold on drywall

That is because dry wall is a material that has pores that without a doubt can harbor and absorb molds. If the mold on drywalls ares not seen that much you can still keep your walls clean using traditional household cleaners such as rag, water and soap. However, you need to replace your wall if it has already spread.

When learning how to do mold abatement,  you need to learn the symptoms of the problems. These include discoloration, bulge and cracked paint. The best way for you to figure out the extent of the contamination on your walls, get a black light and shine it on your walls. It has already grown when you see a yellowish glow on your walls.

Factors to Consider

There are many ways on how to repair mold on drywall. You can either choose from expensive or non-expensive techniques.

For those who want to learn how to do it on their own, you should start by determining first the tools needed to do the job. If you don’t have enough funds to buy new drywall to replace the area where it is present, it is best that you make use of the following:

  • Water
  • Brush
  • Rag
  • Knife
  • Dust Mask
  • Working Suit

Water is one of the basic necessities that you should have around. If you don’t have water source in your home, you need to address it first before learning how to fix a wall. Any spots can be removed with brush and water.

If you don’t have any brush on hand a rag will suffice. Rags can help remove it that haven’t been removed by your brush. When learning how to fix a wall, you will find that a knife can be used to scrape it off forming on your walls. Part of learning  how to do this is to protect yourself at all times hence the working suit.

Once you have finished getting rid of mold from your walls and you have already applied the finishing touches to your walls, make sure that you have sealed the bag and properly dispose them too.

If you have enough cash you need to buy the following:

  • Gloves
  • Safety Glasses
  • A Tyvek Suit
  • Dust Mask
  • Buying New Drywall
  • Saw
  • Nails
  • Hammer
  • Water
  • Knife
  • Measuring tool
  • Paint

Steps to remove mold in drywall

One of the first steps on removing mold in drywall is to don protective gears for your body, eyes, nose and hands. After you have suited up, you should apply water onto any areas that have it to prevent them from spreading and contaminating the rest of the space when you remove them. Use your knife to scratch it off from your walls.

You can do this step if you can reach your walls easily. Again, you can choose between rags or brushes to get rid of the mold. If the contamination is out of reach, use a saw to cut the dry wall. One option you can look into us buying mold removal products for sale which can make your job easier.

The next step is to measure the panel that you will need to replace the damaged area. Before you start cutting your new dry wall, make sure that the measurements are correct. Install your new dry wall using hammer and nails to make sure that it is secured.

The last step is to paint the damaged portion with color the same as that of the existing color. This way, the newly patched area won’t be noticeable to other people especially guests. Following the steps on removing mold on drywall as mentioned here can help you repair it on your own.

Share This Post

Post Comment