The Basics of Bathtub Installation

The Basics of Bathtub Installation

Although it doesn’t take a rocket scientist to figure out how to do bathtub installation, you still need to have skills when it comes to carpentry, plumbing and even tiling. If you plan on replacing an existing bathtub you should know that this project is a bit difficult to do.


Your revamping project can be done quickly enough if you can easily access your existing one. However, if you need to tear down a wall just to get to your old bathtub you will probably spend a lot of time and money to get your bathroom looking better than ever. Fortunately, both of these tasks can be done by a homeowner who loves to do things on their own. Of course, you need to have someone help you do the work like moving it and tearing down the wall. Again, you should only do this project if you have the necessary skills. If not, it is best to leave the installation to the experts.

Tools that you need

When it comes to this, you need to have the right tools and materials on hand. If this is your first time to do this particular project on your own, you need to have the following:

* Pipe wrench

* Hammer

* Pliers

* Safety glasses

* Pipe caps

* Adjustable wrench

* Screwdriver

* Putty knife

* Cold chisel

Once you have everything with you, you can now proceed to prepping it for your new unit. Here are the steps you need to follow to get your replacement bathtub in place.

* The first step  is to make sure that the frame included in unit you have just bought should be fitted in place. Follow the instructions indicated in the package so you can get it done correctly.

*  The accompanying mixer or taps should be attached to the unit. For taps that have plastic washer included, you should install them in between the taps. A plate to support the taps is required, they are made from plastic.

* The next step is to fit the connectors to the flexible taps underneath the bathtub. Use the olives and nuts to do so.

* Spread mastic filler around the outlet hole for the sink before fitting the outlet for the plug-hole. The plug-hole can be fitted into the hole using the nut that is included in the unit. Take a closer look at the plug-hole to determine whether there is any inlet where you can attach the overflow pipe.

* Install the overflow pipe into the inlet.

* Another step to follow  is to wind the waste outlet’s thread to the bathtub. This way, you can attach the trap to the waste outlet located at the bottom of the tub using silicone mastic. You should do the same when attaching the overflow tube.

The Costs

Before you start with your b, you should determine first the cost of the entire project. There are many factors that affect bathroom remodeling costs not just the price of the tub and the labor included. Depending on what kind of remodeling plan you have in mind, you need to take into account the cost of the materials you will be using, the cost of tearing walls or flooring and of course, whether or not you will be hiring someone else to do the work for you.

Learning more about bathroom remodeling costs can give you a much better idea on how much you will be spending for the entire project. For homeowners who are on a tight budget, finding out the estimated cost can help you decide whether or not you have the funds to cover this project. You can have someone do the estimate for you if you want to get a somewhat accurate estimate. It may mean paying a consultant but it will be worth it just to know the cost of the entire project.

DIY homeowners who plan on doing bathroom remodeling on their own should definitely take into account the basics of bathtub installation as well as the cost of the project to be able to prepare for it.

What are the uses of bathtub inserts and how they are put in place?

What are bathtub inserts? This is a question many are asking because bathtubs have the tendency to get scraped, broken or damaged. Replacing a bathtub can cost a lot of manpower, time and money. But with the use of them, this problem can be avoided. They completely fit right over the accessible tub using little hardware and locking mechanism. Aside from this, inserts are quite handy to use especially by kids and even the elderly. There are many styles and designs available when it comes to inserts for the bathtub. Some are even equipped with fixtures such soap dishes, shampoo holders and even tower vessels.

How to install bathtub inserts

Here are the steps:

  • Installing inserts for bathtubs is simple. First you need to ensure if the insert kit you have purchased has all the necessary parts included. After that, make sure that the inserts fit it perfectly. If the insert kit you have bought fits it well, make sure that the gasket is aligned properly.

  • Use a cleaner that is non-abrasive to remove any dirt or grime from your bathtub and shower. Afterwards, allow them to dry out first prior to installing the inserts. This is due to the fact that moisture can build up which can affect the installation process.

  • Fitting the insert can help you determine whether or not it is a perfect fit. If it is, the next step would be to use caulking on the upper portion of the shower drain. Do the same with the gasket at the bottom of the tub. See to it that the silicone caulking applied around the drain bass is around half an inch.

Advantages and disadvantages

  • There is no more demolition necessary. Replacing a bathtub is a big chaos and can add to your rebath cost. It is also labor extensive. You have to tear out the existing bath tub and border before restoring both. You also need to deal with all the plumbing. Choosing liners remove all of these including the cleaning part. Since most of the inserts being sold today are made from either plastic or acrylic they aren’t that difficult to maintain. Their natural gloss and shine is enough to create a whole new look while at the same time providing you and your family with a functional and safe one to use.

  • Quick installation. It will only take a professional installer to do the entire installation process in just six hours at least. Compare this with replacing your entire setup as well as the rebath cost and you know you have decided which solution to use.

  • The only drawback to the inserts is that they don’t do much when it comes to the backflow of water when using it. The inserts are only used to create a different look for it. There is also a possibility for water to get in between the liner and the tub which can be a problem for some. Sometimes installing this add-on can make it feel unsteady especially at its base.

Now that you know the pros and cons of using inserts for the bathtub, it is better that you weigh your options carefully. Determine which method works best for your situation and budget so you won’t have to go beyond what you can easily afford. If it helps, try to look for reviews on the different inserts available today and how much they can affect your rebath cost. For sure, this information can help you decide whether or not this is the solution for you.

Revamping the look of it may be ideal if you don’t have the budget for a complete overhaul. However, if you are worried that installing inserts won’t do much in terms of preventing water from overflowing then you might want to look at other options. Many choose to use inserts because they provide it with a whole new look that suits them. 

When searching to buy bathtub inserts always make it a point to learn as much as you can about the product so you won’t end up with the wrong insert to install.

Tips on buying a Bathtub Liner

It may just be what your bathtub needs when remodeling your bathroom. Many homeowners who are planning on giving their bathroom an upgrade often think about whether or not they should repair or replace their existing tub. Replacing an old tub may mean lots of time put into installing a new one not to mention spending a lot of money for it as well. For those who are stuck with a budget, you can still give your bathroom a whole new look thanks to manufacturers who have come up with a way to meet the demands of their clients. Trying to reduce the costs is every homeowner’s dream and it can be yours too when it comes to giving it much needed upgrade.

Nowadays, you have two options when it comes to upgrading it without getting a replacement. You can either use it or you can perform resurfacing for it. Both of these methods are quite affordable compared to having to purchase a new tub. However, which of these two is right for you? Well, read on to find out more about these two techniques in bathroom renovation.

All About them

For homeowners, deciding whether or not they should do it can be difficult. This is no surprise because everyone wants the best for their home. To help you come up with a wise decision let us find out more about these two.

  • Bathtub Liners – This type of covering is usually made from acrylic or PVC. It is usually installed on the surface of it and then glued in place to give the tub a different kind of look minus the usual mess. You can find these liners in most home improvement and hardware stores and they come in various designs, styles and colors. You just need to decide which product is suitable for your needs and your budget as well.

  • Bathtub Resurfacing – Another method that can help you redesign the look of your tub is through resurfacing. Although this is a useful technique in upgrading, it is just too time consuming not to mention messy too. Not only will you need to sand your tub but you also need to paint it and apply several coating as well to get that whole new look. If you are not really interested in doing the work on your own, you can have contractors fix your tub for you. This may mean doling out extra cash but it will be worth it once you see the final outcome.

Can it Affect Remodeling Costs?

Most homeowners are concerned with remodeling costs. This is not a surprise especially when people are facing tough times nowadays. Saving money as much as they can while revamping the interior may be far out of reach for some but any of the two steps mentioned above can help create a more interesting look to your space without breaking your bank.

Remodeling costs can vary depending on the scope of work. It can also change based on the materials you will be using like installing one. If you are willing to make do with the existing tub but try and revamp its look using a liner or resurfacing project then you can expect to see the cost to go down.

If you are still having a hard time deciding whether or not you should do it, you might want to read reviews online or in magazines. Although you will find many companies suggesting that resurfacing it is a much better choice, homeowners who have tried installing a bathtub liner agree that this item sufficed in giving their tub a different look. Installing a liner was even easier compared to having to do all the sanding, painting and coating of their bathtub not to mention less mess to begin with.

When you have set your eyes on a remodeling project, you must consider whether or not it is better to get a new one or do some adjustments to your existing tub. If you have the means to get a brand new one then do so. However, if a simple bathtub liner or resurfacing can do the job, they are worth taking especially when you are on a budget.

Share This Post

Post Comment